Neptec IE 3600 Ion Exchanger – Laboratory Deionized Water System
Neptec IE 3600 Ion Exchanger – Laboratory Deionized Water System
€1.324,00 excl. VAT
The Neptec IE 3600 is a high-capacity mixed-bed ion exchanger designed to produce deionized water for laboratory equipment.
The stainless-steel cartridge contains high-quality ion exchange resin that removes dissolved ions from tap water, producing water comparable to distilled water quality.
With a capacity of approximately 3600 liters and a maximum flow rate of 1000 L/h, the IE 3600 is a reliable solution for supplying autoclaves, laboratory glassware washers and climate chambers in laboratories across the BeNeLux region.
Reliable deionized water supply for laboratories
The Neptec IE 3600 ion exchanger provides laboratories in the BeNeLux with a robust and economical solution for producing demineralized water for laboratory equipment.
- Produces deionized water using high-quality mixed-bed ion exchange resin
- Ideal for laboratory autoclaves, glassware washers and climate chambers
- Higher flow rate suitable for multiple laboratory devices
- No wastewater stream during operation
- Durable V4A stainless-steel cartridge design
Mixed-bed ion exchanger for laboratory deionized water
The Neptec IE 3600 is a pressure-resistant ion exchanger designed to produce deionized water for laboratory and industrial applications. The cartridge is filled with high-quality mixed-bed resin that removes dissolved ions such as calcium, magnesium, sodium and chloride from tap water.
This process produces water with a conductivity typically between 0.1 and 20 µS/cm, comparable to distilled water quality. :contentReference[oaicite:1]{index=1}
Suitable for a wide range of laboratory applications
Ion exchangers are widely used when laboratories require demineralized water but do not require the full contaminant removal provided by reverse osmosis systems.
Typical applications include:
- Laboratory autoclaves and sterilizers according to DIN 285
- Laboratory glassware washers
- Climate chambers and environmental test systems
- Cooling systems
- General laboratory water supply
Cost-effective alternative to reverse osmosis
Ion exchangers provide a low-investment solution for producing demineralized water. Unlike reverse osmosis systems, they operate without generating wastewater.
Once the mixed-bed resin capacity is exhausted, the cartridge must be regenerated or replaced.
Durable stainless-steel construction
The IE 3600 cartridge is manufactured from corrosion-resistant V4A stainless steel and designed for operating pressures up to 10 bar. Integrated handles and a lance system simplify installation and cartridge replacement.
Service and supply in the BeNeLux
Labman supplies Neptec ion exchangers throughout Belgium, the Netherlands and Luxembourg and supports laboratories with installation advice, resin replacement and technical assistance.
Technical specifications – Neptec IE 3600
| Technology | Mixed-bed ion exchange |
| Water quality | 0.1 – 20 µS/cm |
| Flow rate | Up to 1000 L/h |
| Capacity | Approx. 3600 L (at 300 µS/cm feed water) |
| Resin volume | 26 L |
| Material | V4A stainless steel |
| Maximum pressure | 10 bar |
| Maximum water temperature | 40 °C |
| Connections | R ¾″ |
| Dimensions | 237 × 700 mm |
| Weight | 27 kg |
Available accessories
- Digital conductivity meters (D200, DB800, LED520, LED320)
- Reinforced connection hoses
- Quick-release coupling conversion kits
- Stainless-steel wall brackets
- Solenoid valves for automated operation
- Water leak detector with sensor
- Pressure regulator 0–4 bar
- Pure water sampling taps
- Pure water manifolds with multiple outlets
- Pure water shut-off valves
Alternative Deionized Water Systems (Ion Exchange)
- Product: high-capacity mixed-bed ion exchanger for laboratory deionized water
- Feed: tap water / potable water
- Flow rate: up to 2400 L/h
- Capacity: approx. 8400 L at 300 µS/cm feed water
- Water quality: 0.1–20 µS/cm demineralized water
€2.606,00 excl. VAT
- Product: mixed-bed ion exchanger for laboratory deionized water
- Feed: tap water / potable water
- Flow rate: up to 600 L/h
- Capacity: approx. 2800 L at 300 µS/cm feed water
- Water quality: 0.1–20 µS/cm demineralized water
€1.035,00 excl. VAT
- Product: mixed-bed ion exchanger for laboratory deionized water
- Feed: tap water / potable water
- Flow rate: up to 1800 L/h
- Capacity: approx. 6000 L at 300 µS/cm feed water
- Water quality: 0.1–20 µS/cm demineralized water
€2.014,00 excl. VAT
- Product: ultra high-capacity mixed-bed ion exchanger for laboratory deionized water
- Feed: tap water / potable water
- Flow rate: up to 2400 L/h
- Capacity: approx. 15000 L at 300 µS/cm feed water
- Water quality: 0.1–20 µS/cm demineralized water
€3.245,00 excl. VAT
- Product: high-capacity mixed-bed ion exchanger for laboratory deionized water
- Feed: tap water / potable water
- Flow rate: up to 2400 L/h
- Capacity: approx. 11000 L at 300 µS/cm feed water
- Water quality: 0.1–20 µS/cm demineralized water
€2.982,00 excl. VAT
- Product: mixed-bed ion exchanger for laboratory deionized water
- Feed: tap water / potable water
- Flow rate: up to 500 L/h
- Capacity: approx. 2500 L at 300 µS/cm feed water
- Water quality: 0.1–20 µS/cm demineralized water
€896,00 excl. VAT