Type 1+3 water system TRITON 12
€7.080,00 excl. VAT
- Product: type 1 ultrapure water + type 3 reverse osmosis water
- Feed: tap/domestic water
- Dispense rate: 2 L/min
- Type 3 production rate: 12 L/h at 10°C, 15 L/h at 20°C
- Storage: type 1 production on demand, Type 3: 10 L tank
- Dispenser: non-telescopic, attached
* For this product, some information exchange is needed to optimize the configuration for your specific application before you can order.
Description
The TRITON 6 lab water series is modular designed and can be connected directly to tap water.
With a 10 liter tank and a production rate of 12 liter per hour, it offers great flexibility for your
specific needs.
Each system meets and exceeds ASTM Type 1 and 3 standards. The combination of state-of-the-art
treatment technologies ensures consistently ideal ultrapure water quality for reproducible
analytical results.
The compact design of the TRITON makes it easy to integrate into almost any laboratory
environment.
Features
- 100% Made in Germany
- Reliable ultrapure water quality – ASTM type 1+ and 3
- Simple and economical change of the consumables
- Large and intuitive touchscreen
- Leak water detector
- Measuring and monitoring of the permeate flow
- Pressure reducer
- Data capture via USB
- Dry-run protection
- Simple disinfection procedure
- Pressure and flow sensor
- 10l tank (alternative tanks on request)
- Tank water conductivity and temperature measurement
- Plug and Use – All consumables and installation material included
- Note on the replacement of all consumables (no obligation to replace)
- Warnings and notes in clear text
- Alarm history
Systems configuration
- Wide-range power supply 80-264V / 50-60Hz
- Housing with an easily accessible service cover
- Compact production unit fits easily into various free spaces in the lab
- Exchange of consumables within seconds due to quick-connect couplings
- Integrated pressure reducer for different inlet pressures
- Pressure sensor for monitoring of the working pressure and as a dry-running protection
- Low-noise and durable recirculation pump for the complete internal recirculation of all wetted parts up to the final dispensing valve
- Ultrapure water cartridge for the final removal of organics and remaining ions
- Up to three measuring cells for the exact measurement of the conductivity and temperature after each purification cartridge
- Flush valve for the effective cleaning of all wetted parts as well as an adjustable quality flush during stand-by
- Microfiltration for the sterile ultrapure water withdrawal at the point of use
User interface
- Large and intuitive touchscreen
- Stored dispensing reports with all information ensure an absolute traceability of the water withdrawals
- Individual adjustment for displaying the conductivity (MΩcm or μS/cm)
- Multilevel conductivity and temperature monitoring for pure and ultrapure water, temperature compensated with stepless limit adjustments
- High-precision measuring with integrated reference resistors as well as deactivatable temperature compensation acc. to USP
- Leakage monitor with error message and automatic shut-off of the feed water supply
- Continuous surveillance of all relevant parameters and values incl. early reminders when a
change of consumables is pending - GLP-compliant data storage via USB
Storage tank
- Made of PE for a for a minimum release of extractables
- A smooth inner surface prevents biofilm formation
- 10l or 50l pure water tank with conical bottom (more tank sizes are available on request)
- Flexible positioning, for example as a platform for the main system
- With sterile overflow and sterile vent filter with CO2 Adsorber protecting your stored water against airborne contaminants Adjustable tank level and measurement in 1% steps
Specifications
- Warranty: 2 years
- Lead time: 4-5 weeks
Feed water requirements
| Feed water quality | Potable tap water |
| Feed water quality Conductivity at 25°C | < 1000 µS/cm |
| Total organic carbon (TOC) | < 1 ppm |
| Inlet pressure* | 1 – 6 bar |
| Temperature | 5 – 35 °C |
* Additional pre-treatment units are available if the feed water is out of specs
Ultrapure, Type 1 water specifications
| Resistivity at 25 °C | 18.2 MΩ∙cm |
| Total organic carbon (TOC) | ≤ 2 ppb
≤ 10 ppb (without UV) |
| Particles content | Particle-free (size > 0.22 µm) |
| Bacteria | < 0.01 CFU/mL
< 0.005 CFU/mL (with ultrafilter) |
| Pyrogens (endotoxins) | < 0.001 EU/mL (with ultrafilter) |
| RNases | < 0.003 ng/mL (with ultrafilter) |
| DNases | < 0.4 pg/µL (with ultrafilter) |
| Flow rate | adjustable up to 2 L/min |
Pure water specifications in the tank (Type 3)
| Retention rate | > 98 % ions, germs and bacteria |
| Performance | 12 L/h |
Technical data
| Ambient temperature | +2 – 35°C |
| Supply voltage | 90-240V / 50-60Hz |
| Connected load | 120W |
| Connection size | R ¾“ |
| Weight (complete) | 15kg |
Dimension
Options that can be integrated in the system
- 10000578 Option – UV-lamp 185/254nm for TRITON
- 10001036 Option – UV-lamp + Ultrafiltration module for TRITON
- 10000894 Upgrade – Pure water tank 50l incl. level sensor, circulation pump, sterile overflow, sterile vent filter + CO2 absorber, pressure outlet and dispensing gun (Type 3)
- 10000456 Option – UVC-LED tank disinfection
Accessories
- 10000581 Wall mount for production unit TRITON
- 10000541 Wall mount for 50l tank
- 10000589 IQ OQ qualification documents
- 10000367 Water softener VD 8
- 10000480 External pressure pump 3m³/h at 3 bar
- 10000590 Disinfection kit TRITON 6|12 incl. 3 disinfectants